C Trivedi
Present the ultimate Lamination machine - Webmate, which is
easy to handle, install and operate. It takes care of Large
Quantity of Lamination work in a non-messy & Organised manner.
Gravure coating system with
reverse arrangement.
Cantilever type impression pressure assembly
actuated with pneumatic piston for rubber roll,
Doctor blade and Nip Roller.
Fully insulated glass wool sheet fitted
in the panel (Top side & Bottom) for controlling heat
loss.
One & one slit type air flow arrangement,
Divided equally are placed against roller for proper web
support.
Exhaust Nozzles are equally distributed
through-out the length of drying chamber.
Digital temperature controller with indicator
& PT 100 sensor for each zone.
Inside heating for Nip steel roller.
Two roll surface Rewinder with slipping
clutch assembly.
CT. SRA Web system for controlling the Web
after the Drying tunnel.
Web width
: 400-1600 mm.
Unwind Rewind Diameter
: 600-1000 mm.
Hot Air Temp
: 50-1500C
Machine Speed
: 60-120
Heat Source
: 1 HP AC motor with blower for each zone
(optional) / Hot air generator
Exhaust
: 3 HP
Main Drive
: 5 HP
Material to be Laminated
: Paper, Poly, Polyester, BOPP, Aluminum
Foil etc.
